EU Declaration of ConformityRegulation (EU) 2023/1542
Manufacturer: Dongguan Xuanli Electronics Co., Ltd.
1. Product identification
| Product: | 803450-1S Lithium-ion battery (rechargeable) |
|---|---|
| Battery category: | Portable battery (general use) |
| Model: | 803450-1S |
| Batch number: | See battery body: DD MM-YYYY or YYYYMMDD or DD MM/YY or YYMM |
2. Object of the declaration
This declaration covers the following product:
803450-1S Lithium-ion battery (rechargeable)
| Model: | 803450-1S |
|---|---|
| Chemical system: | Li(Ni0.5Co0.2Mn0.3)O2 (Li-ion) |
| Nominal voltage: | 3.7V |
| Nominal capacity: | 1500mAh (5.55Wh) |
| Category: | Portable battery (general use) (sealed, ≤ 5 kg) |
| Battery type: | Lithium secondary battery (rechargeable) |
The battery can be identified by the model number “803450-1S” printed on the negative terminal of each battery and on the product packaging. The batch number can be traced via the battery body or the purchase order number and packaging label.
For complete technical specifications, performance data, markings and safety information, please refer to the battery information page.
3. Manufacturer
| Name: | Dongguan Xuanli Electronics Co., Ltd. |
|---|---|
| Address: | Room 202, No. 3 Chenwu Street, Shayao, Shijie Town, Dongguan, Guangdong, China |
| Website: | www.xuanlibattery.com |
| E-mail: | xuanli888@xl-battery.com |
4. EU Authorised Representative
| Representative: | Apex CE Specialists GmbH |
|---|---|
| Address: | Grafenberger Allee 277, 40237 Düsseldorf, DE |
| Contact person: | Owen Li |
| E-mail: | info@apex-ce.com |
| Tel.: | +49 21186392011 |
5. Declaration of conformity
We, Dongguan Xuanli Electronics Co., Ltd., declare under our sole responsibility that the product described above complies with the applicable requirements of the following legislation:
Regulation (EU) 2023/1542 of the European Parliament and of the Council of 12 July 2023 concerning batteries and waste batteries, amending Directive 2008/98/EC and Regulation (EU) 2019/1020 and repealing Directive 2006/66/EC.
Conformity has been assessed by demonstrating compliance with the technical specifications, standards and/or regulations listed below.
6. Applicable standards
| IEC/EN 62133-2:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells and batteries – Part 2: Lithium systems |
|---|---|
| IEC/EN 62619:2022 | Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| UN38.3 | UN Manual of Tests and Criteria, Part III, sub-section 38.3 (transport of dangerous goods) |
7. Conformity assessment
Assessment procedure: Module A – Internal production control
The conformity assessment procedure applied is Module A – internal production control, as described in Annex VIII of Regulation (EU) 2023/1542. Under this procedure, the manufacturer bears sole responsibility for ensuring that the battery complies with all applicable requirements of the Regulation. The manufacturer keeps the technical documentation and the EU declaration of conformity for 10 years for inspection by the national market surveillance authorities.
Notified body: Not applicable
Module A (internal production control) does not require the involvement of a notified body.
8. Restriction of hazardous substances Compliant
Hazardous substances compliance statement
This product complies with the heavy metal concentration limits set out in Annex I of Regulation (EU) 2023/1542:
| Mercury (Hg): | ≤ 0.0005% by weight |
|---|---|
| Cadmium (Cd): | ≤ 0.002% by weight (portable batteries only) |
| Lead (Pb): | ≤ 0.01% by weight (portable batteries only; zinc-air button cells exempt until 18 August 2028) |
This product complies with the applicable restrictions of REACH Regulation (EC) No 1907/2006, Annex XVII.
This product complies with the EU POPs Regulation (EU) 2019/1021.
This product complies with the RoHS Directive 2011/65/EU and Directive (EU) 2015/863.
Testing is performed in accordance with the IEC 62133 series of standards.
For the complete hazardous substances statement, see the battery information page – Hazardous substances.
9. Other regulatory provisions
Battery management system (BMS) Applicable
This product is a rechargeable lithium-ion battery pack with an integrated BMS protection board, with built-in electronic protection against overcharge, over-discharge, overcurrent and short circuit. All provisions of the Regulation concerning batteries with a BMS and active electronics apply to this product; the BMS protection functions comply with EN/IEC 62133-2:2017+AMD1:2021.
Annex III – Performance and durability requirements Compliant
This battery is a rechargeable portable battery for general use. Under Annex III of Regulation (EU) 2023/1542, the electrochemical performance and durability parameters of rechargeable portable batteries for general use (rated capacity and capacity retention after charge/discharge cycles) apply from 18 August 2028. For the rated capacity (1500 mAh) and cycle life (≥300 cycles, according to IEC 62133-2) of this battery, see the battery information page.
Directive 2014/30/EU – Electromagnetic compatibility (EMC) Compliant
This battery is a rechargeable secondary battery pack with a built-in BMS protection board containing active electronic protection circuits. It complies with EN IEC 61000-6-1:2019 and EN IEC 61000-6-3:2021; the EMC Directive 2014/30/EU applies to this product.
Articles 48–52 – Supply chain due diligence obligations Not yet applicable
The due diligence requirements laid down in Chapter VII of the Regulation apply only to economic operators with an annual net turnover of more than EUR 40 million. Dongguan Xuanli Electronics Co., Ltd. did not reach this threshold when issuing this declaration.
Article 11 – Removability and replaceability of portable batteries (general use) Not yet applicable
This battery is a stand-alone rechargeable battery supplied as an independent product; the manufacturer does not incorporate it into any appliance. The removability and replaceability requirements of Article 11 apply to portable batteries incorporated into appliances and therefore do not apply to this product as supplied.
Article 8 – Recycled content in batteries Not yet applicable
The delegated act setting minimum percentages of recycled content for portable batteries for general use has not yet been published. This requirement is currently not enforceable for this battery category.
Article 7 – Carbon footprint declaration Not yet applicable
The delegated act laying down the carbon footprint calculation rules for portable batteries for general use has not yet been adopted under Regulation (EU) 2023/1542. This requirement is currently not enforceable for this battery category.
10. CE marking and labelling
The following markings are printed on the battery body and/or packaging in accordance with Article 13 and Annex VI of Regulation (EU) 2023/1542:
- Manufacturer identification – XL, XUANLI or the OEM brand name, or N/A.
- Model identification – 803450-1S is printed for identification and traceability.
Separate collection symbol (crossed-out wheeled bin) – indicates that the battery must not be disposed of with unsorted household waste and must be collected separately (Article 13, Annex VI Part B).
CE marking – indicates compliance with all applicable EU health, safety and environmental protection requirements (Articles 19–20).- Nominal voltage – indicated on the packaging (3.7 V).
- Production date code – YYYYMMDD format (e.g. 20261008 = 2026-10-08) for batch traceability.
- Capacity marking – the rated capacity of this rechargeable battery (1500 mAh) is marked in accordance with Article 13(2) and Annex VI.
“Keep out of reach of children” symbol – warns against the risk of swallowing, especially by young children (Article 13).
For full marking details and visual references, see the battery information page – Marking.
Signatures
Signed for and on behalf of:
Dongguan Xuanli Electronics Co., Ltd.
| Place: | Dongguan, China |
|---|---|
| Date: | 2026-04-18 |
| Name: | Su Peilian |
| Position: | Quality Manager |
Signature
Signed for and on behalf of:
Apex CE Specialists GmbH
| Place: | Düsseldorf, Germany |
|---|---|
| Date: | 2026-04-18 |
| Name: | Owen Li |
| Position: | Authorised Representative |
Signature